Main purposes:
Vertical pipeline centrifugal pump, 1.ISG type for the transport of water and physical and chemical properties similar to water or other liquids for industrial and urban water supply and drainage, high-rise building pressurized water supply, garden irrigation, fire booster, long distance transportation HVAC circulation, bathroom, heating and cooling water circulation booster and equipment for temperature T <80 ° C.
2.IRG Vertical heat pumps in the metallurgical, chemical, textile, wood processing, paper as well as restaurants, bathrooms, hotels and other boiler high temperature hot water pressurized circulating transportation and urban housing heating circulating pumps, temperature of 120 ℃, the following.
3.GRG type vertical high-temperature centrifugal pumps are widely used: energy, metallurgy, chemical, textile, paper, and restaurants, bathrooms, hotels and other boiler high temperature hot water booster cycle of transmission, as well as urban housing heating circulating pumps, temperature of 240 ℃ below.
4.IHG type vertical pipeline chemical pump for conveying solid particles, corrosive liquids of viscosity similar to water, apply to the petroleum, chemical, metallurgy, electric power, papermaking, food, pharmacy and synthetic fibers sector , the use of temperature -20 ℃ ~ 120 ℃.
The VERTICAL pipeline pump 5.YG for the transport of gasoline, kerosene, diesel and other petroleum products, the transmission medium temperature -20 ℃ ~ + 120 ℃.
6.IHGB vertical stainless steel explosion-proof chemical centrifugal pump for the transportation of flammable chemical liquid.
7.ISGD, IRGD, GRGD, IHGH, YGD, IHGBD Vertical low-speed centrifugal pump, for the occasion and air-conditioning cycle low ambient noise requirements.
ISGB vertical explosion-proof pipeline centrifugal pump

Working conditions:
   
≤ 1. Suction pressure ≤ 1.0MPa, or pump system maximum working pressure of 1.6MPa, that is, inlet pressure + pump lift ≤ 1.6MPa, the hydrostatic test pump pressure ≤ 2.5MPa, please specify when ordering the system working pressure. Working pressure of the pump system should be greater than 1.6MPa when ordering separately, using steel materials in order to manufacture parts and join parts of the pump flow.
(2) ambient temperature <40 ° C, relative humidity <40.
3 the transmission medium solid particle volume concentration does not exceed 0.1 per unit volume, particle size <0.2mm.
Note: If the medium with small particles, when ordering, so that manufacturers use to wear style mechanical seals.
Features:
A pump for the vertical structure, import and export of the same caliber, and in the same center line, as the valve installed in the piping into the compact appearance, small footprint, low building into, such as with a shield can be placed outdoors.
Impeller directly mounted on the long axis of the motor, short axial size, compact structure, reasonable configuration of pump and motor bearings can effectively balance the radial and axial loads of pump operation, thus ensuring the smooth operation of the pump. small vibration, low noise.
The combination of mechanical seal or mechanical seal, shaft seal is imported titanium alloy seal ring, medium-sized high-temperature mechanical seal and the use of carbide materials, wear-resistant sealing, can effectively extend the service life of mechanical seals.
4 Easy installation and maintenance, no need to open the pipeline system, as long as remove the pump conjoined nut to be pulled out all the rotor components.
5 according to the needs of the flow and head to pump the string, the parallel use of the way.
6 according to the vertical and horizontal piping arrangements require the use of pump installation